Zeolit Bathroom&Spa Paint

PRODUCT DESCRIPTION

Special, pure acrylic based, water based, matte, decorative, top coat interior wall paint.

PROPERTIES

This is a special, pure acrylic based paint developed for the purpose of preventing sweating caused by high level of humidity on paint film of humid places such as bathroom, kitchen and spa. The empty microcapsules in the paint assure heat insulation between the painted surface and paint surface and thus prevent sweating caused by temperature differences. Thanks to heat insulation offered by microcapsules in the paint, it prevents heat loss in indoor spaces. It effortlessly holds on to all kinds of surfaces. It does not crack, fall off and turns pale.

APPLICATION

It can be easily applied to any kind of plaster, exposed and gas concrete, concrete panel, plaster board, walls and ceilings with old paints, mdf, osb surfaces and paintable wallpapers  after recommended basis forming and primer procedures. The application areas should be dry, clean and free from dust. The old and blistered painted surfaces should be cleaned by scraping. Rough or loose surfaces should be filled with "Düfa Acrylic Interior Putty" when necessary in order to smoothen the surface. After smoothening process, it is recommended to use "Ultra Acrylic Transparent Primer" or "Ultra Acrylic 1/7 Concentrated Primer" of one coat on absorbent surfaces such as the calcareous ones or ones on which satin plaster and putty are applied so as to reduce top coat paint consumption and enhance adhesion of paint on surface. The surfaces on which synthetic paint is applied should be sandpapered and it should be free of dust. It is recommended to use "Ultra Acrylic Cover Primer " of one coat as transformation primer while shifting from synthetic painted surface to water-based surface and in case of colour changes. 

It is applied as two coats on surfaces on which “Bathroom&Spa Paint" primer has been applied by roll or brush after diluting by 20% at maximum with water. Waiting time between coats is 3-4 hours (may vary according to ambient temperature). Application temperature should be between 5˚C and 35˚C.

DRYING TIME

Touch Dry: 30–40 minutes. Waiting between coats: 3–4 hours. Through-dry time: 24 hours.(23 °C and 50% Humidity)

CONSUMPTION

Depending on absorbing capacity and type of the surface, an area of 14-18 m² is painted on single layer. Field sample work should be carried out for precise consumption.